/**
  @page UART_IRDA UART_IRDA example
  
  @verbatim
  ****************** (C) COPYRIGHT 2023 ESMT Technology *******************
  * @file    UART/UART_IRDA/readme.txt 
  * @author  ESMT Application Team
  * @version V0.0.4
  * @date    23-April-2023
  * @brief   Description of the UART UART_IRDA example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, ESMT SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
  * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM
  * THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   @endverbatim

@par Example Description 

This example describes how to use the UART IrDA Mode.

In this example, Main clock is configured at 24MHz.

Output IRDA communication data on the UART1 TX pin when this routine starts running.

The UART1 is configured as follow:
  - BaudRate: 115200
  - Word Length: 8
  - IrDA mode is enabled

@par Directory contents 

  - UART/UART_IRDA/UART_IRDA.uvprojx    MDK5 project file
  - UART/UART_IRDA/UART_IRDA.uvoptx     MDK5 project options file
  - UART/UART_IRDA/JLinkSettings.ini    Jlink settings file
  - UART/UART_IRDA/main.c               Main program


@par Hardware and Software environment 

  - Hardware environment
    - The chip pins are connected as follows：
      - UART1 (PD5) is connected to the IRDA transmitter


@par How to use it ? 

In order to make the program work, you must do the following :
 - Open UART_IRDA.uvprojx from this example folder by Keil MDK5
 - Rebuild all files and load your image into target memory
 - Run the example 
   
 * <h3><center>&copy; COPYRIGHT 2023 ESMT Technology</center></h3>
 */
